List EIE Projects for Electronics and Instrumentation Engineering Students

Electronics and Instrumentation Engineering (EIE) is one of the topmost branches in engineering. There are many projects developed for EIE students. Here, we are giving some list of project ideas for EIE Students, which are basic level to advanced level EIE projects with real-time applications. This article list outs different EIE projects for engineering students. The following list of EIE project ideas is collected from different categories like electrical, embedded, solar, microcontroller, robotics, communication, GSM, DTMF, etc. So these EIE projects are suitable for EIE students while selecting the project in final year engineering.


List EIE Projects Ideas with Abstracts for Engineering Students

The list of EIE project ideas with abstracts for engineering students is listed below.

EIE Projects for Engineering Students
EIE Projects for Engineering Students
  • Propeller Display to Time and Message – Abstract
  • GPS – GSM Based Vehicle Tracking System – Abstract
  • Automatic Irrigation System on Sensing Soil Moisture Content – Abstract
  • Wireless Health Monitoring System for Patients- Abstract
  • Precise Digital Temperature Control – Abstract
  • Security System Using Smartcard Technology
  • Line Following Robotic Vehicle – Abstract
  • TV Remote Operated Domestic Appliances Control
  • Programmable Load Shedding Time Management for Utility Department
  • Object Detection by Ultrasonic – Abstract
  • Tampered Energy Meter Information Conveyed to Concerned Authority by Wireless Communication
  • Distance Measurement Using Ultrasonic Sensor – Abstract
  • Portable Medication Reminder
  • Programmable Energy Meter for Electrical Load Survey
  • Networking of Multiple Microcontrollers
  • SCADA for Remote Industrial Plant – Abstract
  • Movement Sensed Automatic Door Opening System  – Abstract
  • Pick N Place with Soft Catching Gripper – Abstract
  • Fire Fighting Robotic Vehicle – Abstract
  • War Field Spying Robot with Night Vision Wireless Camera – Abstract
  • GSM Protocol Based Integrated Energy Management System with Acknowledgement Feature
  • Underground Cable Fault Distance Locator – Abstract
  • Dialed Telephone Numbers Display on Seven Segment Displays
  • Non-Contact Tachometer – Abstract
  • Line Following Robotic Vehicle Using Microcontroller – Abstract
  • Auto Selection of Any Available Phase, in 3 Phase Supply System
  • Life Cycle Testing of Electrical Loads by Down Counter
  • Energy Meter Reading with Load Control Using GSM Technology
  • Stamp Value Calculator for Postage Needs
  • Railway Track Security System – Abstract
  • Temperature Control System Using Thermistor
  • Electronic Eye Controlled Security System – Abstract
  • Finger Press Quiz Buzzer
  • Digital Control Home Automation System – Abstract
  • Tank Water Level Indicator – Abstract
  • Home Automation System Using Touch Screen – Abstract
  • Speed Checker to Detect Rash Driving on Highways – Abstract
  • Home Automation System  Using RF– Abstract
  • Obstacle Avoidance Robotic Vehicle – Abstract
  • Metal Detector Robotic Vehicle – Abstract
  • Passport Details Using RFID Technology – Abstract
  • IR Controlled Robotic Vehicle – Abstract
  • Robotic Vehicle Controlled By Cell Phone – Abstract
  • Device Control and Authentication Based on RFID Technology Using PIC Microcontroller – Abstract
  • System of Solar Energy Measurement – Abstract

EIE Projects

The EIE projects for engineering students are discussed below.

Underground Cable Fault Distance Locator

This system provides a way to detect the location of the fault in underground cables which are otherwise an impossible task. The project uses resistors to represent an equal distance of the cable and the voltage drop across the resistors is sensed and processed to determine the exact location.

Here four rows of resistors are used with three rows connected to ground through a relay switch and the fourth row of resistors is connected to the feeder unit giving some DC voltage supply. A switch is connected in series with each resistor in the three rows, used to represent the fault (on line to ground connection). When a fault occurs at any distance (represented by the closing of the switch), the voltage drop across the resistors is sensed and is converted to digital form using an ADC and this value is processed by the microcontroller to determine the distance of the fault. This distance is then displayed on the LCD display.

GSM Electricity Energy Meter Billing

This project defines a digital way of calculating the electrical energy units consumed and sending this data electronically through GSM communication to the power station so that it is processed and based on this data the bill is prepared. This gives away to the users to keep a track of the energy units consumed.

The Energy meter is connected to the optoisolator and for each unit, the LED of the optoisolator blinks 10 times. The pulses from the optoisolator are fed to the microcontroller and when 10 pulses are received, it is assumed to be one unit. Accordingly, the microcontroller receives the no. of units and sends the information about the units consumed to the power station through the GSM modem. The electricity units consumed is displayed on the LCD display.

Programmable Energy Meter for Electrical Load Survey

This project is designed to measure the electrical energy unit consumed by a single load for a certain amount of time and accordingly calculate the cost of using that load for the given time. This project provides a way to have knowledge about the energy consumption of loads and how using these loads can affect the monthly energy bill.

The energy meter is connected to the load, which is a lamp in this case. The input from the energy meter is given to the optoisolator which produces a fixed number of pulses for the single unit of energy consumed. These pulses are fed to the microcontroller. A set of pushbuttons are interfaced to the microcontroller to enter the time for which the load is switched on and the rate of each unit of energy. Based on this input data and the units (pulses received by the microcontroller), the microcontroller accordingly calculates the energy consumed by the load for that certain amount of time and also the cost of using that load. The units consumed and the cost is displayed on the LCD display.

WSN using Virtual Instrumentation in Dangerous Environments

This project uses a WSN for safety monitoring of industrial hazardous. This system can be implemented through a GUI software & wireless data acquisition unit. ARM controller based Zigbee network mainly gets the information from the different types of sensors and sends it to the remote monitoring PC. LabVIEW software using Zigbee receiver obtains the information and this information can be further displayed over GUI.

Power Analyzer based on a LabVIEW

This project is mainly used to make a virtual instrument that is used to examine the parameters including power quality such as power factor, instantaneous power, active power, harmonics, & reactive power. This project works by using LabVIEW software & data acquisition card to attain the design.

Inductance Capacitance & Frequency Meter

This proposed system uses a portable instrument used for measuring frequency, capacitance, and inductance with the help of a PIC microcontroller. This project uses two circuits like an LC oscillator as well as an RC oscillator using a PIC microcontroller to measure the different parameters. This frequency meter can be provided using LCD display & two probes to display the results by connecting the required components correspondingly.

Virtual Instrumentation System Design & Development using LabVIEW

This project explains how to get Electrooculography signal & processing instrument to detect the movements of the eye. This detection system helps disabled persons while moving their wheelchair depending on the movements of the eye. By using LabVIEW software, Electrooculography signals can be acquired and processed.

Monitoring & Controlling of Oil Well using WSNs

This project uses ZigBee WSNs for monitoring and controlling of the oil well. This wireless sensor network includes different nodes where every node includes sensors such as gas, temperature, and level sensor through a microcontroller unit. The data of all the nodes in the network can be collected & monitored at mid control room with the Zigbee transceiver module so that the information can be gathered & also transmits the control signals in the direction of the individual nodes.

50+ EIE Project Ideas for Engineering Students

The list of EIE project ideas above 50 is listed below.

  • The list of EIE project ideas for engineering students is listed below.
  • Hybrid Agricultural Robot Design & Implementation
  • Design & Implementation of a Robotic Controlled through Wireless Gesture Arm
  • Air Pollution Control & Detection in Vehicles
  • Interacting Conical Tank System Modeling & Simulation
  • Digital Tachometer through Contact-Less
  • WSN using Virtual Instrumentation within a Dangerous Environmental
  • Accident Preventing System in Automobiles
  • WSN based Smart Water Monitoring System
  • Pick & Place Robot through a Soft Catching Gripper based on Android
  • Transferring System of Lignite using Microcontroller
  • Electronic Circuit Breaker which Acts Ultra Fast
  • Measurement System of Solar Power
  • Zigbee based Wireless Home Automation System for Voice Recognition
  • Measurement System of Water Quality
  • PEM Fuel Cell System Controller Design & Modeling
  • Power Analyzer based on LabVIEW
  • Reading of Automated Wireless Meter for Monitoring & Controlling of Power Consumption
  • Automation System for Railway using Wireless Sensor Networks
  • Induction Motor Fault Diagnosis using PLC & SCADA
  • Ultrasonic Sensor-based measurement of Distance
  • Controlling of Precision Temperature
  • Controlling of Digital Temperature Precisely
  • PID Implementation in Real-Time for Fuzzy PD Controllers used in DC Servo Motor
  • Star Delta Starter for Induction Motor with Relays & Adjustable Electronic Timer
  • LabVIEW & Microcontroller based SCADA System
  • Controlling of Auto Power Supply from Mains, Solar, Inverter and Generator to Make Sure No Break Power
  • Energy Meter Reading based on GSM for Load Control
  • MEMS Digital Accelerometer Vibration Monitoring using LabVIEW
  • Wireless Camera with Night Vision based Spying Robot in War Field
  • Microcontroller and Ultrasonic Sensor based Distance Measurement
  • Health Monitoring System Wirelessly used for Patients in Hospitals
  • Ultrasonic based Detection of Object
  • Security System Controlled by Electronic Eye
  • Energy Management System Integrated by GSM Protocol & Acknowledgement Characteristic
  • Bell System used in Institutions Automatically
  • Robotic Vehicle used for Fire Fighting
  • Device Control & Authentication bas4ed on RFID & PIC
  • Microcontroller based Beacon Flasher
  • Robotic Vehicle for Avoiding Obstacle
  • Multiple Motors Speed Synchronization Speed Synchronization
  • Management System with Optimum Energy
  • Controlling System of Water Level Automatically with PLC Project
  • Vending Machine for Liquid Dispenser Automatically
  • Robotic Vehicle Followed by Line
  • Controlling of Water Pump Automatically through 4 Different Time Slots
  • Traffic Controlling using Zigbee
  • PIC Microcontroller based Controlling of Load Sharing
  • Inspection Robot for Indoor Pipeline using Zigbee
  • Operation of Automatic Rain using Solar & Wiper
  • Alarm System for Wireless Earthquake
  • Alert System of Automated Elevator
  • Object Sorting Automation with an Industrial Robot
  • Recycling of Water for Car Wash through PLC
  • Cutting Machine for Paper using PLC
  • Fire Detection of Multi-channel & Alarm System using PLC
  • Billing of Power Meter & Controlling of Load with GSM
  • Control System for Smart Elevator using PLC
  • Machine for Bottle Filling and Capping through PLC
  • GSM based Energy Management System through Programmable Numbers
  • Machine for Stamping & Labeling Automatically using PLC
  • Robotic Arm Controlled by Remote with RF
  • Monitoring & Controlling of Drainage with PLC
  • Control System for Dam Shutter using PLC
  • Detection of Liquid Level & & Flow Control based on ARM
  • Overheat Detection of Machine through an Alert

Related Links:

Thus, this is all about an overview of EIE project ideas for electronics and instrumentation engineering students. The above projects will aid the students in choosing the right project in their final year project work.

Comments are closed.