Recommended Electronic Kits For Your Final Year Engineering Projects

Are you searching for electronic projects kits for your final year projects? It is generally for the students who are in different fields like electronic, electrical, computer, telecommunication of most colleges to finish their final year project work. Every student must synthesize the theory and practical work they learned during the 2 to 3 years in order to finish their project work. Under the guidance of their guides or faculties, they must investigate, design, study, execute and then present their document to the supervising committee. Some of the recommended electronic projects which students may want to study and get some ideas from are discussed below. It generally includes the use of a microcontroller or a microprocessor in the following projects.

Recommended Electronic Projects Kits

Among the projects that one can study is the helpfulness metering projects which will become a norm in the near future. Hands-on of these projects will allow one to explain himself with the C language, assembly language, and other tools that are required in the project. Here are some of the recommended electronic projects kits for final year engineering students that you can get some ideas from.

Recommended Electronic Projects Kits For Final Year Projects

Get recommended electronic projects kits final year projects for electronics and communication along with project guidance and tutorials for your research and studies. Also get learning tutorials so that you can understand easily. Here is a list of recommended electronic kits for final year projects. Electronic kits are designed to support students score well in their final year engineering courses. This article consists of a list of the latest recommended electronic projects kits that can help students in their project preparations. Find the best electronic kit for your final year projects here at our online project repository www.edgefxkits.com and view our project kits for engineering projects here.

Display of Underground Cable Fault Distance over the Internet

Display of Underground Cable Fault Distance over the Internet by Edgefxkits.com
Display of Underground Cable Fault Distance over the Internet by Edgefxkits.com

The main target of this project is to discover the underground cable fault distance in km from the BSS (base station) and also to show the same over the internet. In general, if any mistake occurs due to any reason in the underground cable system then, it is very tough to recognize the exact location of the error to repair it.The above kit represents the projects of underground cable fault detection and show over the internet. This project kit is inbuilt with a power supply, relays, microcontroller, LCD display, and also GSM module. Therefore, this projected IOT application can be applied for detecting the precise location of the error and also for sending the information to a specific website in graphical setup along with an LCD using GSM module.

Raspberry Pi based Auto Intensity Control

Raspberry Pi based Auto Intensity Control
Raspberry Pi based Auto Intensity Control

The proposed system uses a raspberry pi and also light emitting diodes instead of HID lamps in the street lights. A raspberry pi is used to regulate the intensity of light for emerging pulse width modulation signals which drive a MOSFET to make the LEDs switch ON according to the specific operation.A bunch of light emitting diodes is used to design a street light. The Raspberry Pi board includes programmable instructions, that controls the intensity of light based on the PWM signals generated. The intensity of light can be kept high during the peak hours. Hence the traffic on the main roads decreases gradually, then the intensity of the light also reduces till morning. Lastly, it ends at 6 am and again remains at 6pm in the evening.

Soil Moisture Sensed Auto Irrigation System

Soil Moisture Sensed Auto Irrigation System Project Kit by Edgefxkits.com
Soil Moisture Sensed Auto Irrigation System Project Kit by Edgefxkits.com

The main objective of this project is to design an automatic irrigation system which turns ON the motor pump ON/OFF on detecting the moisture content of the soil. Development of using this process is to reduce human intervention and to ensure proper irrigation.The proposed system uses an 8051 series microcontroller which is pre-programmed to get an i/p signal of changing the condition of moisture in the soil through the detecting arrangement. Once the microcontroller accepts this signal, it produces an o/p that drives a relay for functioning the water pump. This is attained by using an operational amplifier as a comparator.

Time Programed Sun Tracking Solar Panel

Time Programed Sun Tracking Solar Panel Project kit by Edgefxkits.com
Time Programed Sun Tracking Solar Panel Project kit by Edgefxkits.com

This proposed system employs a solar panel fixed to a time programmed stepper motor to track the sun so that max sunlight is ended incident upon the solar panel at any time of the day. This is best compared to the light-detecting method that may not be correct always – for instance, during cloudy days. The microcontroller employed in this project is from the 8051 families. The Stepper motor is driven by an interfacing integrated circuit as the controller is not accomplished by handling the power supplies of the stepper motor. This specific project is provided with a replica solar panel, which can be used for demo purpose only.

Vehicle Movement Sensing Led Street Light with Off-Peak Hour Time Dimming

Vehicle Movement Sensing Led Street Light With Off-Peak Hour Time Dimming Project Kit by Edgefxkits.com
Vehicle Movement Sensing Led Street Light With Off-Peak Hour Time Dimming Project Kit by Edgefxkits.com

The main goal of this project is to design a system for detecting a vehicle movement on highways to switch on only a block of street lights that are in front of the vehicle, and mechanically switch off the blinking lights when the vehicle passes away from the street lights. This project will help to conserve more electrical energy. The IR Sensors  are located on both edges of the road, that are used to detect the vehicle movement and send the logic signals to a microcontroller to turn on/off the LEDs for an exact distance. Hence, this is the way of switching ON & OFF the street lights.

Thus this is all about recommended electronic projects kits are underground cable fault, vehicle movement sensing, sun tracking solar panel, irrigation, auto intensity control. We hope that you have got a better understanding of this concept. Furthermore, if you have any queries or to implement electronic projects please give your valuable suggestions by commenting in the comment section below. Here is a question for you, what are solderless projects ?

Add Comment