Latest Top 10 IEEE Based M.Tech Projects in Electronics 2014

This article presents a list of top 10 M.Tech projects in electronics, based on IEEE standards. Unlike the B.Tech projects that need not be real-time or research-based projects, electronics, and communication projects in M.Tech need to be completely real-time based and are mostly implemented in any organization or industry.

The following is a list of all the projects along with a brief idea about each one.


1. MOSFET Embedded Sensor for MEMs Application

MOSFET Embedded Sensor
MOSFET Embedded Sensor

This is one of the latest M.Tech projects involving MEMs fabrication. This project involves designing a MOSFET-based sensor, which is based on the fact that drain to source current of the device changes with the application of stress. The integration of CMOS electronics with the MEMs sensors facilitates the development of a low cost, accurate and high sensitive signal conditioning circuit.

2. Design of a Wireless Body Area Network

Wireless Body Area Network
Wireless Body Area Network

This project is proposed to design a wireless monitoring system wherein the body parameters in the form of raw data, from different patients are multiplexed and transmitted to the monitoring station, where they are analyzed and processed using software like MATLAB. The project also involves the use of biomedical sensors and RF module for wireless communication.

PCBWay

3. Design of a Fingerprint System Using Capacitive MEMs Touch Sensor

This project is proposed to design a fingerprint sensor by designing, simulating and fabricating a capacitive array of sensors using MEMs fabrication techniques. This system involves the detection of ridges and valleys on the silicon layer using the sensors.

4. Mobile Sensor Navigation System

This is one of the embedded projects used in applications like Robotics, surveillance, wildlife monitoring, where there is a requirement to track mobile targets. The Mobile sensor navigation system uses a semidefinite programming technique that involves the estimation of the location of the target based on the TOA measurement model. This model takes into account the presence of noise in sensor data.

5. Vehicle Collision Avoidance System

Collision Avoidance System
Collision Avoidance System

This project proposes the use of a neural network architecture involving dynamic functioning, which is based on fuzzy sets, to develop an anti-collision prediction system. This system is basically proposed to reduce the number of road accidents due to the collision.

6. RF Radiation Package

This project is designed to develop an RF radiation system with highly strict packaging issues and high pulse repetition rate. It is designed to achieve field strength up to 4700KV/m. The RF radiation package involves batteries, power supply unit, Marx generator unit and antennas directly incorporated as output to the Marx unit. This system can also be used in other electronics and communication projects.

7. Energy-Optimized Driving System with Autonomous Vehicle

This project is designed to develop an energy-optimized driving system based on information from the traffic signals. It involves the development of a wireless communication system between the vehicles and the traffic control unit. The system also involves the use of sensors to detect the surrounding environment and to get the local traffic information. Based on the sensor’s inputs, a Metaheuristic approach to develop an optimized driving system is proposed.

8. 360 Degrees Robotic Rotation

This project is proposed to develop a complete automatic Robot that can not only sense the objects in its path, but also can pick up the objects and place them at other locations, or change its course of direction like a pick and place robot. This system targets to achieve a 360-degree rotation of the robot wherein the robot can rotate in all directions on its own. This is also one of the popular types of embedded projects.

9. Android-Based Wireless Thermal Printing System

Wireless Thermal Printing System
Wireless Thermal Printing System

This project is designed to develop a wireless thermal printing system using Bluetooth technology. It involves the wireless transmission of the data from an Android-based application to the controller by using the Bluetooth technique and then printing the data using a thermal printer.

10. Biometric System Based on Iris Recognition

Biometric System based on Iris recognition
Biometric System based on Iris recognition

This project is proposed to design a biometric system that involves human identification based on their iris structure. This biometric system uses a high-resolution imaging technique with the IR illumination method to get images of the iris, and then processes the images using digital technology to obtain the details of an individual. It is more stable and gives better performance.

11. Iris Movement Based Wheelchair Control using Raspberry Pi – A Start of Art

Being disabled make people be dependent on others to do their day to day work. Aiming to help such people, so that they can do the task independently, many methods and projects are being proposed. Paralysis is the medical condition which also leaves people disabled. One of such paralysis is Quadriplegia. In this, the whole body gets paralyzed except eyes. This project is proposed to help such people suffering from Quadriplegia. Here, the movement of their wheelchair is controlled by their eye movements. To implement this idea IR camera module is used and image processing is done using OpenCV. Raspberry Pi programmed with python is used to control the system.

12. Smart Harvest Analysis using Raspberry Pi based on the Internet of Things.

Agriculture is the basic source of income in many countries. With the growing greenhouse effect and pollution, our weather cycle is changing randomly and climatic conditions are becoming difficult to predict. This change in weather conditions highly affects the growth of the crop. In this project, a machine learning algorithm is used to predict the right crop to be grown depending upon the collected topological data, soil and weather conditions. Aiming to help farmers to get high yield, this system( SHARP) can monitor the crop for water level management, automatic irrigation and manual/automatic control of motors. Raspberry Pi is used to collect the data, send it over the server and update the database. This data is used for prediction and can be viewed on the mobile phone.

13. Hazard Reconnaissance Rover using Raspberry Pi and Multiple Sensors

The most challenging work for rescue teams during natural or manmade calamities is to find people among the debris. During such a situation, there are also some dangerous and confined spaces where the rescue team cant reach. this project is designed to be helpful in such hazardous situations. Designed using Raspberry Pi this four-wheeled Rover has a compact body with multiple sensors such as Temperature sensor, Humidity sensor, Gas detector, and a Night vision camera.

14. Real-time Robotic Car Control using Brainwaves and Head Movements

In this project, the robotic car is controlled using head movement and blinking of eyes. Emotiv Epoc Headset is used to obtain the gyro and EEG signals. These signals are used to determine the direction of the robotic car. Threshold values are decided using the maximum and minimum amplitude values of the gyro signal and ratio of beta waves and alpha waves. Arduino UNO is used for the implementation of this project due to its low cost and programming flexibility. Thus, in this project, the real-time control of the robotic car is done using head movements.

15. Monitoring System for Solar Panel using Smartphone-based on Microcontroller

With the depletion of fossil fuels, we are moving towards the harvesting of energy through natural energy sources. Some of the natural energy resources are wind energy, solar energy, tidal wave energy , etc… Solar power harvesting can provide the best solution to meet our energy demands in the future. Many countries have already laid solar power plants to harvest solar energy. With this, it becomes crucial to monitor the photovoltaic cells and measure the power generated by them. In this project, a real-time monitoring system is proposed that can monitor the performance of the solar panels using a smartphone. Arduino Atmega 2560 along with voltage sensor, current sensor, and temperature sensor is used to implement the system. The wifi module is used to connect the system to the smartphone. Blynk app is used to display the measurements of voltage, current, and temperature of the solar panels.

We believe that the efforts we put in to bring forth the above mentioned robust and advanced M.Tech projects would be of immense help for those students and readers who are keenly interested in doing projects in myriad areas like Robotics, MEMs, Android OS, Embedded Systems and so on.

Furthermore, we have been providing articles on a regular basis for all our readers and followers, particularly for those who are in search of M.Tech projects and engineering projects. Therefore, we encourage our readers and followers to mention their project requirements and choices pertaining to the projects, along with their feedback in the comment section given below.

Photo Credits:

  • MOSFET Embedded Sensor by kansai
  • Wireless Body Area Network by ualr.edu
  • Collision Avoidance System by nhtsa
  • Android Based Wireless Thermal Printing System by ytimg

39 Comments

  1. Hi sir,
    I’m pursuing M.tech 1st year in embedded systems.I want small projects on LIFA(lab view and arduino),with an application.

  2. Zeba Fathima says:

    I’m doing Mtech in VLSI and embedded systems.I’m in search of a real time project which includes both VLSI and embedded in it.Can you suggest any such current topics for it plz?

  3. Zeba Fathima says:

    I’m doing Mtech in VLSI & Embedded systems.I’m in search of a real time project which includes both VLSI & Embedded in it.Can you suggest any current topics for it plz?

  4. Zeba Fathima says:

    I’m doing Mtech in VLSI & Embedded Systems.I’m in search of a real time project which includes both VLSI & embedded in it.Can you suggest any such current projects plz?

  5. Hello sir, its neeti
    Sir i want a project on “Organic solar cell” simulation. I want to do simulation on Tcad Atlas Silvaco . May i get this project.

  6. sir i am mayank ..i am student of sscet bhadrawati, our guide wants latest projects, we search on many projects but he rejected so can u tell me some latest projects name.

  7. Hi. I am Deeksha. I am persuing my M.E. in Industrial automation and RF engineering. I would like to know about the projects which can be taken up in my final year.

  8. Bhupender says:

    Sir I m bhupender mtech ECE I want to do project based on ieee papers which kind of project help is provided by u.
    Provide me ur no. and office address

  9. Sir
    I am pursuing ME in EXTC..im looking out fr projects in Image Processing and data compression..kindly suggest few along with base paper if any..

  10. Manisha singh says:

    Hello sir..
    I m Mtech 1st year student. I m a ..I m doing mah mtech 1st yr.my branch is electronic design and technology .can u help me and guide me for a topic on whch I will do the project… and I think for iot based project

  11. Rahul Tichkule says:

    Hello
    i am pursuing M.tech in ECE field. i would like to know latest wireless network projects based on simulation with minimum requirement of hardware.

  12. Rahul Tichkule says:

    Hello
    I am pursuing M.tech in ECE field. i would like to know latest wireless networks projects based on simulation with minimum requirement of hardware.

  13. swapnil s abhyankar says:

    sir i m be extc student can u give me some ideas on robotics project

  14. hello sir,
    I am ece Mtech 2nd yr student ..i want to know about recent project in networking

  15. Shital Atole says:

    Hello sir, I am ME ece student. I want to do simulation projects. Can u give me some guidance plzz.

  16. sir iam doing mtech communication engineering.i would like to get some wireless final year project using software matalb coding.

  17. sir can you provide me latest communication based projects for mtech.

  18. Hi I m athira..final yr ece student.i would like to do projects on embedded .no need of medical application.

  19. K C karthik says:

    Hello Sir, I’m looking for M.Tech projects in Automotive electronics field. Can you suggest/send me some links regarding it.

    Thank you

  20. prasanna arla says:

    hello sir i am pursuing m.tech in digital electronics and communication system,so please suggest me some DIP nd MATLAB projects.

  21. Samuddeta D H says:

    Hello sir,
    I m doing m.tech in digital communication and networking…..I would like to get some latest real time projects related to wireless sensor network and digital communication….

  22. i want to do some research on mobile communication or secure communication.what topics are most convenient for average student like me.?

  23. Sunil Goswami says:

    Sir..I’m doing my M. Tech in Electronics & Communication. Sir i would like to get some latest real time projects related to communication(antenna based)..!!

  24. i need a project for my M.TECH within 20 days
    i want to implement this IEEE paper
    Design and implementation of Reed Solomon Decoder for 802.16 network using FPGA
    please tell me if it is possible and also the fees for the same

  25. ramit ranjansahoo says:

    Hi sir…I’m ramit doing my mtech 1st yr..I m very confused to get the topic..so plz guide and help me to gind out the topic where I wil do project..I will must put mah labour to get solution to ur topic…plz help me…

  26. ramit ranjansahoo says:

    Hii sir..I m doing mah mtech 1st yr.my branch is power system and control..can u help me and guide me for a topic on whch I will do the project…

  27. I want to know the full details of this topic Vehicle Collision Avoidance System

  28. I am pursuing m.tech in communication system(1st yr) and our college is conducting a seminar which is based on the recent developments,recent research works or inventions in communication system. Please suggest me some very popular research works or important appliances that we use in our day-to-day life that is based on the principles used communication system.Reply me as soon as possible

  29. Sir,
    I wish to do ‘Android-Based Wireless Thermal Printing System’, could you please give me its details…..

  30. UPASANA MUKHERJEE says:

    Sir,
    I am pursuing m.tech in Microelectronics And VlSI(1st Year) and our college is conducting a seminar which is based on the recent developments,recent research works or inventions in Microelectronics and VLSI. Please suggest me some very popular research works or important appliances that we use in our day-to-day life that is based on the principles used in microelectronics or VLSI programming.Reply me as soon as possible.

  31. sir,am doing my mtech in vlsi n embedded sys can u suggest some new topics in embedded sys for my final yr project

  32. Sir,
    can you provide me the following project ‘FPGA Prototyping and Validation of an EPC Gen 2 RFID Tag’

  33. sir i need the project name “wire less body monitoring system ”
    can u sold the project to me?

  34. Sir..I’m doin my M.E. in Communication Systems..I would like to get some latest real time projects related to communication..!!

  35. Good evening!!
    m final. year BE student -EC
    I looking for ieee project could you please suggest me some new topics…
    thank you

  36. sr,
    could you pls give me aproject on wireless technology i am an mtech student in that

  37. Sir im Mtech final yr student
    I want realtime projects based on labview so plz help me

  38. vishakha rawat says:

    sir, i am pursuing m tech in digital signal processing and i want to make a project for my m tech in medical electronics. i have been through so many topics but i cannot get some of the tools for hardware based project. kindly suggest me something that can be easily made.

  39. Bharat patel says:

    i want to know any applications based on SAM4E controller

Add Comment